Shower Screens

The finishing touch that keeps water where it belongs

A shower screen does two jobs. It contains water within the shower so the rest of the bathroom stays dry, and it defines the look of the room. A clear frameless panel can make a small bathroom feel twice the size, while an old framed screen with cloudy glass and mouldy seals can make even a well-tiled bathroom look tired.

We supply guidance on and install shower screens across Warragul and the surrounding district, both as part of renovations and as standalone replacements. Screens are measured once tiling is complete for a precise fit, and installed by insured trades with careful sealing.

Types of shower screens

Frameless screens

Frameless screens use thick toughened glass held by minimal hardware such as hinges, clamps or a low-profile channel. They offer the cleanest look, are easy to clean because there are few frames to trap grime, and let light flow through the room. Frameless screens suit contemporary bathrooms and walk-in showers.

Semi-frameless screens

Semi-frameless screens have a frame around the fixed panels but a frameless door, or minimal framing at key points. They offer some of the openness of frameless glass with added rigidity, and suit a wide range of bathrooms.

Framed screens

Framed screens have aluminium frames around all panels and doors. They are robust and practical, especially in showers with less-than-square walls, and are available in a range of frame finishes.

Fixed panels

A single fixed panel, often used in walk-in showers, has no door at all. It is the simplest and most open option, but needs enough shower length so water does not escape at the open end.

Sliding screens

Sliding doors suit bathrooms where a hinged door cannot swing, such as over a bath or in a narrow room.

Over-bath screens

A fixed or hinged panel over a bath keeps water off the floor when the bath is used as a shower, replacing a shower curtain with something cleaner and more durable.

Glass options

• Clear glass: the most popular choice, letting light flow through the room.
• Low-iron glass: removes the slight green tint of standard glass for a crystal-clear look.
• Frosted or patterned glass: provides privacy where the shower is visible from the door.
• Tinted glass: smoky grey or bronze tones add a contemporary look.
• Coated glass: factory coatings help repel water and reduce soap scum and mineral marks.

All shower screen glass must be safety glass. We install screens using toughened safety glass compliant with Australian Standards.

Choosing glass thickness

Frameless screens typically use thicker toughened glass than framed screens, because the glass itself provides the structure. Thicker glass feels solid, closes with a satisfying weight and resists flexing, but it is heavier and needs hinges and wall fixings rated for the load. Semi-frameless and framed screens use thinner glass supported by their frames. We recommend a thickness that suits the screen type, the door width and the wall construction, and make sure fixings go into solid framing or appropriate anchors rather than relying on tiles alone.

Screens for older and out-of-square showers

Many Warragul bathrooms, particularly in older weatherboard homes, have walls that lean slightly or floors that are not quite level. A standard off-the-shelf screen in these showers leaves gaps, doors that swing open on their own or panels that sit visibly out of line. Custom measuring solves most of these issues, with panels cut to follow the actual walls. Where the variation is significant, a semi-frameless or framed screen with adjustable channels can absorb the difference more gracefully than a fully frameless design. We tell you during measurement which approach will give the best result in your shower.

Privacy and the view from the door

In many homes, the shower is the first thing you see when the bathroom door opens, or it is visible from a bedroom in an ensuite. Clear glass looks wonderful but offers no privacy. Options include a frosted band across the middle of the glass, a fully frosted panel on the side facing the door, a fluted or reeded glass that blurs the view while letting light through, or repositioning the door during a renovation. We consider sight lines during design so the shower feels private without darkening the room.

Hardware finishes

Hinges, clamps, handles and channels come in finishes that can match your tapware: polished chrome, brushed nickel, matte black, brushed brass, gunmetal and more. Coordinating the screen hardware with your tapware and accessories gives the bathroom a cohesive look.

Measuring and installation

A shower screen is custom-made for each shower, so accurate measurement is essential. We measure after tiling is complete, because walls are rarely perfectly plumb and floors fall to the waste. The screen is then manufactured to suit. Installation involves fixing the hardware securely to the wall and floor, aligning the glass, adjusting doors so they swing and close smoothly and sealing all junctions with silicone.

In a renovation, this means the screen is typically one of the last items installed, often a short while after tiling is finished. We plan for this in the project schedule.

Replacing an old screen

If your shower is in good condition but the screen is dated, damaged or leaking, a new screen alone can make a big difference. We remove the old screen, clean and repair the tiled surfaces where the old frame was fixed, and install the new screen. Old framed screens often leave screw holes or marks, and we assess whether these will be covered by the new screen or need attention.

Screen repairs and resealing

Not every screen problem requires replacement. Common issues we fix include:

• Worn or missing door seals and wipers that let water escape.
• Hinges that have dropped, so the door no longer closes properly.
• Loose handles or clamps.
• Failed silicone along channels and wall junctions.
• Doors that rub on the floor or the fixed panel.

Where glass is chipped or damaged, it should be replaced, because toughened glass can shatter if its edge is damaged.

Designing the shower around the screen

In a renovation, the screen should be considered early. The size of the shower, the position of the shower head, the location of the waste and the floor falls all affect how well a screen contains water. A walk-in shower with a fixed panel needs the shower head positioned so spray is directed away from the opening. A hinged door needs clearance from the vanity and toilet. A linear grate at the entry can catch water before it leaves the shower. We think about these factors during design so the finished screen works as well as it looks.

Caring for your screen

• Squeegee the glass after each shower to prevent water marks and soap scum.
• Clean with mild, non-abrasive products. Avoid scourers, which scratch glass.
• Clean hardware gently with a soft cloth to protect the finish.
• Check seals and silicone periodically and replace them when worn.
• Ventilate the bathroom so the glass dries quickly.

Tank water and some town water can leave mineral marks on glass. Squeegeeing after use is the simplest way to keep glass clear, and coated glass helps further.

Common questions

How long does it take to get a new screen?

Screens are custom made after measurement, so there is a manufacturing period before installation. We give you a timeframe when we measure.

Can you install a frameless screen on my existing shower?

Usually yes, provided the walls and floor can support the fixings and the shower dimensions suit the design. Some older showers with hobs or uneven walls need careful assessment.

Why does water escape from my walk-in shower?

Often the shower is too short for an open design, the head is directed at the opening or the floor does not fall correctly. We assess these factors and suggest solutions, such as a door, a return panel or a repositioned shower head.

Can you replace just the seals?

Yes. Replacing worn seals and wipers is a simple repair that can stop water escaping.

Hardware worth choosing carefully

Hinges, clamps and handles carry the weight of the glass every day. We favour solid brass or stainless hardware in finishes that match your tapware and resist corrosion from Gippsland’s softer town water and tank supplies alike.

Book a consultation

If your shower screen is old, leaking or no longer suits your bathroom, book a consultation. We will assess the shower and recommend the right screen or repair.

Areas we service

• Bathroom Renovations Brandy Creek
• Bathroom Renovations Buln Buln
• Bathroom Renovations Bunyip
• Bathroom Renovations Darnum
• Bathroom Renovations Drouin South
• Bathroom Renovations Drouin
• Bathroom Renovations Jindivick
• Bathroom Renovations Labertouche
• Bathroom Renovations Longwarry
• Bathroom Renovations Neerim South
• Bathroom Renovations Nilma
• Bathroom Renovations Trafalgar
• Bathroom Renovations Warragul
• Bathroom Renovations Yarragon